The MicroCoil Grille is engineered to handle at least 500,00 cycles (open/closes) at speeds of up to 24″ per second.
The MicroCoil® Grille offers an open-air design for increased visibility and ventilation. Curtains are assembled with a minimum solid 5/16 diameter, 5056 H32 aluminum alloy sleeved with horizontal aluminum or stainless steel tube spacers to separate vertical links on alternate rods with continuous end tube spacers. The vertical spacing is 2.5″ to 3.7″ on center. Vertical chains are solid 1/8″ minimum stainless steel links, 1/4 inch wide, positioned by aluminum or stainless steel tube spacers on 9 inch centers. Nylon insert nuts are threaded on to the end of each rod to secure the chains.
Pattern options include:
Pattern options include:
- Brick pattern (EPG324CB)
- Straight pattern (EPG324C)
- Mill
- Clear Anodized
- Stainless Steel
This door features our first intelligent control panel – the Apex™ SmartController. It features:
- Plug-and-play connections between the motor, control panel, and standard sensors
- LCD screen that walks user through:
- Initial door commissioning
- Electrically set limits
- Status and error messages
- Many common door adjustments
This door also comes with a compact direct drive operator with no roller chains or sprockets and an internal inertia brake for safety. It is IP54 rated, which is equivalent to NEMA 3/3S.
Our Extreme High Performance MicroCoil® Grille – 500K Cycle comes in the following standard height and width parameters:
If your maximum height is less than or equal to… | …your maximum width available is: |
10’ | 26’ Stainless Steel Finish |
14’ | 26’ Aluminum Finish |
For openings that fall outside of the standard construction, please contact us.